Gilbert Pavers Free quote

Gilbert, Arizona · Hardscape quotes

A backyard you'll actually use, built with pavers

Patios, driveways, pool decks and walkways across Gilbert. Share a few details and a licensed contractor will come out, measure, and put a price in writing.

  • Free on-site measure
  • Licensed in Arizona
  • HOA-ready plans

Gilbert Pavers is a free referral service. We pass your request to one licensed local contractor and don't do the installation ourselves.

Get a paver quote

Tell us about the project. A licensed hardscape contractor serving Gilbert will contact you to measure and quote it.

Projects

Where pavers make the biggest difference

Back patios

Extend the living space past the slider: room for a dining set, a grill station or a fire pit.

Driveways

A thicker compacted base and an interlocking pattern so the surface carries cars without shifting.

Pool decks

Lighter pavers and travertine that are easier on bare feet than dark concrete in July.

Paths & entries

Front walks, side-yard paths and courtyard entries that lift curb appeal.

Budget

Typical paver patio prices in the Valley

For the Phoenix area, Angi lists an average paver patio cost of about $3,925, with most jobs landing between $2,479 and $7,231. Square footage and the paver you pick drive most of the difference.

Estimate your project

  • ~$3,925Average paver patio, Phoenix metro
  • $10–17Per sq ft for installed concrete pavers
  • $950–1.7kTypical 10 × 10 ft patio

Sources: Angi, Phoenix paver patio costs; HomeGuide, paver patio costs.

Materials

Four paver types, compared

Ranges are installed prices per square foot, materials and labor together. Pattern, cuts and base prep can push a job to either end.

Concrete $10–17

The workhorse: dozens of shapes and colors, and rated for driveway traffic.

Brick $8–19

A warm, traditional look in clay or concrete brick.

Travertine $15–27

Natural stone that suits pool decks and stays cooler in full sun.

Natural stone $16–35

Flagstone and cut stone for a custom, high-end finish.

Installed ranges per sq ft from HomeGuide (concrete pavers, natural stone) and HomeAdvisor (brick, travertine), checked November 2026.

Planning in Gilbert

HOAs, heat and hard water

A little planning before the first paver goes down saves a redo later.

  • Check with your HOA first. If your neighborhood has an association, it may need to approve the paver color, pattern or a front-yard change. Ask your contractor for a simple layout and product sheet to submit.
  • Lighter is cooler. HomeGuide notes travertine stays 20–30% cooler than concrete in direct sun, which matters around a pool.
  • Keep sprinklers off the surface. Hard-water overspray leaves white mineral spots; aim heads away and consider a sealer.
8–10
grains per gallon, average Gilbert tap water

The Town of Gilbert gives this as the average hardness of its tap water and notes it varies by season. Town of Gilbert water FAQ

Under the surface

Four layers of a paver job that lasts

Sinking and shifting pavers almost always trace back to the base. These are the steps to ask about.

  1. Dig & grade

    Old material comes out and the area is sloped so water runs away from the house.

  2. Compacted base

    Crushed aggregate, compacted in lifts, deeper under driveways.

  3. Sand bed & pavers

    A level bedding layer, then pavers placed in your pattern.

  4. Edges & joints

    Edge restraint, joint sand, a final compaction, and sealing if you want it.

Service area

Serving every corner of Gilbert

Requests are welcome from across Gilbert, plus Mesa, Chandler, Queen Creek and San Tan Valley when a contractor has availability.

  • 85233
  • 85234
  • 85295
  • 85296
  • 85297
  • 85298

Hiring checklist

Look up the contractor's license on the Arizona Registrar of Contractors, get base depth and paver brand written into the quote, and secure HOA approval before work starts.

Questions

Before you build

Will my HOA need to approve pavers?

Often, yes, especially for front yards or a color change. Most associations want a layout and the paver product before work begins. Your contractor can usually supply both.

Are pavers worth it over plain concrete?

Concrete is usually cheaper to pour. Pavers cost more but offer many more looks, and a cracked or stained paver can be swapped out instead of replacing a whole slab.

How long does a patio install take?

It depends on size, access and site prep. Your contractor will give you a schedule with the written quote.

Should I seal my pavers?

Sealing is optional. It helps with stains and hard-water spots and can enrich the color. HomeAdvisor puts resealing at roughly $1.50–3 per square foot.

Does a quote cost anything?

No. The request and the measurement visit are free, and there's no obligation to hire.

Get your paver project priced

One licensed Gilbert contractor, a free measurement, and a written quote.